|
Products are available for immediate purchase on-line at the MRT-Shop. Hundreds of items with photos available now. Both Australian and International shipping is no problem. |
 |
|
Products are available for immediate purchase on-line at the MRT-Shop. Hundreds of items with photos available now. Both Australian and International shipping is no problem. |
|
| Genuine Dash pod kit, fitted with HKS gauges, NOTE the OE dash pod is DESIGNED for 40mm (nom) dia. gauges, 50 mm (nom) will fit but are a SQUEEZE! |  |
| Carbon dash pod designed 50 mm
gauges, for the STi ver 4 and 5.
This will fit the std dash above the centre vents, where the std model has a flip top dash compartment. |
 |
| To fit the genuine or MRT carbon
dash pod, the centre OE vents and top tray have to be removed. (After
the flip top lid is removed). and after top screws are removed.
The LATEST MRT pod mounts to the OE hinge and the removal of the tray is optional! To remove the vent assembly, grasp the vents with BOTH hands and pull VERY HARD. The whole assembly will come out but is very hard to remove as it has side mounted plastic moulded angled fixtures that are not designed to be removed. It is this part you have to pull against.
|
 |
| At first you will believe that the part will break, as long as you have the screws out and the assembly held firmed with both hands, it wont! |  |
| Trim of the top moulded tray and
test fit with new dash pod prior to re fitting.
NOTE do not over trim the tray or this will be visible (and ugly) when the assembly is re fitted. |
 |
|
|
HOME |
Copyright © 1995-2007. All
rights reserved.
MRT Performance - ABN 69 198 394 100
EMAIL: info@mrtrally.com.au PHONE: (02)
9767 4545
